Tile Roof Hook
The tile roof hook designed by JY Aluminum Solar Frames is an innovative, patent-certified product that provides one of the most flexible and efficient solutions for tile roof installations without damaging the tile structure during the installation process.
Unlike the common one-piece hooks on the market, this hook features a multi-directional assembly design, offering greater flexibility for adjustments during installation. It allows customers to easily adapt to different roof heights and angles, making it suitable for a wide range of tile shapes and sizes.
The same components can be assembled in multiple directions, allowing the construction unit to adjust according to the frame direction of the site as needed.
The contact surface between the components and the frame is designed with serrated teeth, increasing friction and enhancing tensile strength.
The height-adjustable shaft and horizontal sliding groove are designed for vertical and horizontal adjustments, allowing adaptation to roof surface fluctuations.
System Frame
(Cutting and drilling according to customer’s order)
Model 83152
Al Alloy 6061-T6
Spec.(mm) 115.4*100*30
WT(kg/m) 3.039
ST anodic coating 20µm (sealing+ ED)
Model 83151
Al Alloy 6061-T6
Spec.(mm) 140*75*35
WT(kg/m) 1.615
ST anodic coating 20µm (sealing+ ED)
Model 88047
Al Alloy 6061-T6
Spec.(mm) 70*40*30
WT(kg/m) 1.318
ST anodic coating 20µm (sealing+ ED)
Model 83157
Al Alloy 6061-T6
Spec.(mm) 115*45*30
WT(kg/m) 2.451
ST anodic coating 20µm (sealing+ ED)
Model 83158
Al Alloy 6061-T6
Spec.(mm) 100*35*30
WT(kg/m) 1.964
ST anodic coating 20µm (sealing+ ED)
Model 83159
Al Alloy 6061-T6
Spec.(mm) 100*88.8*30
WT(kg/m) 3.675
ST anodic coating 20µm (sealing+ ED)
Model 83160
Al Alloy 6061-T6
Spec.(mm) 105*40*35
WT(kg/m) 1.742
ST anodic coating 20µm (sealing+ ED)
